3.10
Re-fit the top cover, making sure the
front is attached first. If the top cover
is not fitted correctly the unit will
not switch on
Hint:
Fit the top cover making sure the
front is pushed in place first and then
push the back end with the screws
down to give a snug fit
3.11
Re-fit the two screws that hold
the lid down using a screwdriver.
Caution: The screws should be hand
tightened, do not over tighten
Insert the plug into the mains socket
3.12
Press and hold the dispense button for
10 seconds until you hear a beep as this
will rest the filter timer
Note:
Place a cup or container under
the dispense area before carrying out
step
3.12
3.13
The filter now needs to be flushed,
follow step
2.3
through to
2.8
Summary of Contents for F-FWEG1-M-A-NT Series
Page 19: ......
