CUBE
Manual
Page 10 – Revision 10‐8‐2018
OPERATING INSTRUCTIONS
The above picture shows front LCD display and control panel for the
Waterlogic CUBE Water Treatment
System
.
Button
Operational Use
Select Cold Water Sel Press and Hold Dispensing Button to start
dispensing until desired fill.
Select Ambient Water Sel Press and Hold Dispensing Button to
start dispensing until desired fill.
Hold for 3 seconds
Press and Hold Hot Water Selection for 3 seconds, until the Hot Water
Icon is illuminated. Press + Press and Hold Dispensing Button until
desired fill.
The delay is a safety feature that prevents hot water from
being accidently dispensed.
Hold Extra Hot Selection until
button stops flashing which
indicates the temperature has
been reached.
Press and Hold Extra Hot Water Selection. The Extra Hot Selection
Button will flash red to indicate the water is heating. When the red
flashing icon turns off, this indicates that the water is to the
temperature.
Press the Hot Water Selection Press and Hold Dispensing Button
until desired fill.
WARNING!
Unit produces Very Hot Water up to 95°C (203°F). Water
above 52°C (125°F) can cause severe burns or scalding. Keep
unauthorized people and children away from the unit to avoid
accidental dispensing of hot water. Children should not use without
supervision.
Hold for 3 seconds