background image

Waterlogic® Countertop Service Guide - Version 1, May 2015

3

Declaration and Safety Precautions

Waterlogic International Ltd

1. Do not remove any panels or covers from the appliance unless acceptable in this instruction.
2. When any abnormal case happens, firstly unplug the appliance.
3. The appliance is not intended for use by persons (including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision 
or instruction concerning the use of the appliance by a person responsible for their safety.   
4.  The appliance can be used by children aged from 12 years and above if they have been given 
supervision or instruction concerning use of the appliance in a safe way and if they understand the 
hazards involved. Cleaning and user maintenance shall not be made by children unless they are older 
than 12 and supervised. Keep the appliance and its power cord out of reach of children aged less than 
12 years.  
5. If the supply cord or the detachable cord sets of the appliance are damaged, it must be replaced by 
the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. 
6.  The appliance is to be supplied through a residual current device (RCD) having a rated residual 
operating current not exceeding 30mA.
7. The appliance is intended to be used in household and similar applications such as 
 

- staff kitchen areas in shops, offices and other working environments; 

 

- farm houses and by clients in hotels, motels and other residential type environments; 

 

- bed and breakfast type environments; 

 

- catering and similar non-retail applications.

8. The appliance contains a UV-C emitter (UV lamp)
9. Unintended use of the appliance or damage to the housing may result in the escape of dangerous 
UV-C radiation. UV-C radiation may, even in little doses, cause harm to the eyes and skin. 
10. Appliances that are obviously damaged must not be used.  
11. Read the maintenance instructions before opening the appliance.
12. The appliance must be disconnected from the power supply before replacing the UV lamp.    
13. The UV lamp must be replaced at 12 month intervals or when necessary. If the unit is placed 
in a high use area, the UV lamp will need to be replaced more frequently. 
14. WARNING: Do not operate the UV lamp when it is removed from the appliance enclosure.
15. In accordance with these instructions, the appliance must be properly located and installed before 
use.
16. Appliance must be unplugged before maintenance, cleaning, sanitizing or repairing.
17. The appliance heats water to a temperature above 203°F (95°C). Water temperatures above 125°F 
(52°C) can cause severe burns or death from scalding. Most at risk of being scalded are children, the 
disabled and the elderly.
18. Follow proper grounding safety precautions and instructions prior to plugging in appliance.
19. WARNING: Boil the water should the purification unit fail.
20. Note: Flush 2 liters of water from the system after a system failure.

Summary of Contents for Countertop Pure K-FU-00S20-00C1L-13-0-XXX





















Reviews: