background image

Waterlogic 4 Firewall User Manual- Issue 1, January 2011 

4

Waterlogic 4 Firewall User Manual- Issue 1, January 2011 

5

OPERATING INSTRUCTIONS 

Your  Waterlogic  4  Firewall  is  always  ready  for  use  but  also  features  an  energy  saving  mode 
called sleep mode. If the sleeping cat symbol is illuminated, the machine has entered sleep mode 
and pushing any button will bring the machine out of sleep mode.

Operating the machine is very simple. Firstly, place a cup in the dispense area. Then simply 
select  the  drink  you  require  by  gently  pressing  and  holding  the  button  of  your  selection 
until your cup is filled to the required level. A light will be displayed in the dispense area to 
correspond with your selection. 

HOT WATER CAUTION

n

  Always place cup / mug in the centre of the drip tray.

n

  Always use a ceramic cup or a cup suitable for use with hot water.

n

  Do not hold cup or place hands in dispensing area whilst dispensing water.

n

  Do not dispense water in a stop start style of vending 

  (hold button continuously until cup is full).

n

  Never try to fill more than one vessel at a time.

OPERATING INSTRUCTIONS

HOT WATER

Press the hot water and extra hot water buttons together for 3 seconds (safety 
device to guard against accidental dispensing of hot water). The dispensed light 
will immediately come on and hot water will be dispensed after 3 seconds.

EXTRA HOT WATER

Press  the  extra  hot  button  for  3  seconds.  The  symbols  for  hot  and  extra  hot 
water in the display light up to indicate that the water is heating. Once the icons 
disappear,  the  water  has  reached  the  right  temperature.  To  dispense  extra  hot 
water, press both the hot water and extra hot water buttons together. The extra 
hot water is dispensed after 3 seconds (for your safety). 

HOT, COLD AND SPARKLING MACHINE MODELS 

COLD WATER

Press the cold water button. Cold water will be dispensed 3 seconds after the
button is pressed. If the tank needs to cool, the cooling icon will light up but you
can still dispense water while it is cooling the water.

SPARKLING WATER

Press the sparkling water button.
Sparkling water will be dispensed 3 seconds after the button is pressed.
If the tank needs to cool the cooling icon will light up.

Summary of Contents for 4 Firewall










Reviews: