Installation
24.10.2018
12 / 20
Copyright
2018 by: WATERKOTTE GmbH Subject to changes.
7
Installation and connection
7.1
Overview
Establish the hydraulic connection to the heat pump and domestic water
supply. The connections are located at the bottom of the unit.
During assembly of connecting lines, use an appropriate tool as brace dur-
ing installation to prevent damage.
For detailed information on connecting the domestic water heater to the to-
tal system, please refer to the connection scheme in chap. 12.
After establishing the hydraulic connection, fill and vent the unit.
7.2
Connections and dimensions
Figure 4: Connection dimensions in mm, (bottom)
