Loading the Media Pak
Place the distributor tube back down the center of the tank. NOTE: the top of this tube
should be plugged with a rag or cork to prevent media from entering. Pour the bag of
coarse gravel into the tank, and then pour the bag of fine gravel into the tank.
It is important that the distributor tube is not moved or pulled out as it is not possible to put
it down to the bottom of the tank once gravel or media are in the tank.
Finally pour the larger bag(s) of media into the tank in the following order:
Multimedia Filters
1. Coarse gravel (1/2 x 1/4)
4. Fine garnet (30 x 40)
2. Fine gravel (1/8 x 1/16)
5. Fine filter sand (.45 x .55)
3. Coarse gravel (8 x 12)
6. Anthrafilt
ACF Carbon Filters Neutralizing Filters
1. Coarse gravel
1. Coarse gravel 4. Mag Oxide
2. Fine
gravel
2. Fine
gravel
3. Carbon
3. Calcite
UltramicroFilters
1. Coarse gravel (1/2 x 1/4)
2. Fine gravel (1/8 x 1/16)
3. Nextsand
media
Once this is done, the rag or cork should be removed from the distributor tube. Clean off
the top of the tank. Finally place the control valve on the tank and on to the distributor
tube. Tighten the control valve on to the tank. Connect or reconnect the inlet and outlet and
drain. The control valve should be in the backwash position. Slowly open the inlet valve wa-
ter supply and slowly fill the filter tank until water appears at the open drain line. Return the
15
Summary of Contents for WG185ACF75
Page 9: ...Filter Installation 9 ...
Page 20: ...Power Head Exploded View 20 ...