TROUBLE SHOOTING
The following are a list of minor faults (with instructions on how to rectify them) that should be used by the
operator in the event of the appliance not working prior to contacting a Service Engineer.
PROBLEM
CAUSE
ACTION
1. None of the rings lighting
-
power supply failure
-
gas supply turned off
-
check the in-house electric sys-
tem fuse, replace if necessary
-
check position of gas shut off
valve to appliance.
2. One of the rings won’t light
-
dirt on ignitor
-
injector blocked
-
burner cap & flame cap cover not
in position
-
clean hob ring ignitor
-
remove burner cap & flame cap
cover. Remove obstruction from
injector (see Fig.12)
-
Re-position
3. Hob ring won’t stay lighting
-
dirt on thermocouple
-
clean thermocouple
9
