Step 3: Connect the hoses
1. Install the inlet water hose
Connect the inlet water hose from the feed water adapter to the “IN” LOGO port and pop the lock clip
on the fitting;
2. Install the outlet water hose
Connect the outlet water hose from the faucet to the “OUT” LOGO port and pop the lock clip on the
fitting;
Step 4: Check the leaks and flush the filter
Turn on the cold water supply valve. Check if there’s water leakage at connectors, components, valve
or any connecting position. Then turn on the faucet. It may dispense muddy or black water at the
beginning. Please flush for 10 minutes continuously.
Note:
The water is not drinkable until flushing for 10 minutes.
If water leakage occurs, turn off the water supply. If the water leakage is at position
1
or
2
, wrap Teflon
tape on the external thread. If the water leakage is at position
3
or
4
, insert the quick-connect fitting
to the end.
Inlet
Outlet
Inlet Hose
Outlet Hose
Cold
Hot
Filter system
Faucet hose
1
2
3
4
3
Summary of Contents for WD-TST-UF
Page 2: ......
