Installation of the Filter System
Step 1: Connect to the feed water adapter (cold water only)
1. If the angle valve outlet is 3/8”, inlet hose can be directly connected to the water supply. (Figure 1)
2. If the angle valve outlet is 1/2”, connect it with a No.1 converter at first. (Figure 2)
Step 2: Connect to the faucet
1. If the faucet hose is 3/8”, outlet hose can be directly connected to the water supply. (Figure 3)
2. If the faucet hose is 1/2”, connect it with a No.2 converter at first. (Figure 4)
Note:
If the original faucet is equipped with a male connector, resulting in disconnetion, please
contact our customer services.
Shut off the water supply
Remove the faucet hose
Figure 1
3/8” outlet
Figure 2
Connect
①
to the cold supply valve
1/2” outlet
①
Figure 3
Figure 4
Faucet hose
Outlet hose
②
Faucet hose
2
Summary of Contents for WD-TST-UF
Page 2: ......