1
Installation Instructions
Before Installation
Inspect the Package
Open the box and take out the system housing, all the components, and connect
fittings. Inspect them according to the parts list to ensure nothing is left out or
damaged during shipping. If there are any parts cracked or broken, please do not
proceed with the installation and contact Waterdrop by phone: 1-888-352-3558
Mon-Fri 8:00 AM-5:00 PM (PST) or by email: [email protected]. Identify
and get familiar with all components for quick installation.
Specifications
To achieve the optimal performance, it is highly recommended to use the system
within the operational parameters.
Model
System Size (L*W*
H)
Feed Water Pressure
Feed Water Temperature
Power Specification
Feed Water Requirement
WD-TSU-W / WD-TSU-B
14.81
"
*
4.68
"
*
13.97
"
14.5-87 psi / 0.1-0.6 MPa
41-100 °F / 5-38 °C
4.5V
Municipal Tap Water
Required Tools:
•
Variable speed drill
•
Drill bit: 1
⅜
"
(for faucet hole)
•
Adjustable wrench, pliers
•
Utility knife or scissors
•
Flashlight
•
Towel
Note:
If using well water as the source, please make sure the feed water has
been through a pre-filtration system, otherwise, large particles in well water will
clog the filter easily and shorten filter life.
