11
How to reset the filter life indicator:
Press and hold the PP filter life indicator for 5 seconds until the system beeps
(Figure 8).
Note:
The filter life reset of UF and CT is the same as the reset of PP filter.
PP
Figure 8
How to Flush the Filter after Replacement:
Note:
The corresponding filter life indicator will flash blue during flushing.
For PP and CT filters:
Turn on the faucet to flush for 5 minutes;
For UF filter:
Turn on the faucet to flush for 10 minutes.
4.
Push the filter into the hole with a certain pressure and rotate it a 1/4 turn
clockwise, until the triangle mark is aligned with the solid circle on the front
panel. You may hear a click when the filter is fitted properly;
Note:
Repeat the above steps to install the other filters.
5.
Reset the filter life indicator and flush the filter after replacement (please refer
to the following steps).
PP
1
1
PP
1
1
