waterchef.com
REPLACING THE FILTER CARTRIDGE
7
7.
Remove packaging from new Filter Cartridge then slide into
Housing Tank with the double O-ring facing down.
(fig. K)
8.
Position the Cartridge so that it is aligned with the bottom, center
opening in the Tank.
(fig. )
Press down on the Cartridge so that
the double O-ring seal seats into the bottom, center opening.
9.
Reposition the Top Cap into its original location on Housing.
10.
Reattach the Snap Ring then pull up on the Top Cap Handles to
seat the O-rings.
11.
CLOSE the Drain Valve then turn ON the water supply to the System
by opening the Inlet & Outlet Valves on the Flow Control Valve.
12.
As System fills with water, push down on the RED Pressure
Release Button on Top Cap to relieve System of air.
(fig. M)
Keep
Button pushed down until ALL air is released and water starts
to come out of the Button. Release Button.
13.
Seat Umbrella Cover on top of Housing Assembly
(fig. N)
and
check for leaks.
14.
Flush System by running water through System for 10 minutes
before use. If lights are not flashing GREEN, see step 2.
Housing
Tank
Umbrella
Cover
Bottom,
Center
Opening
Filter
Cartridge
K
L
N
Pressure
Release
Button
M
IMPORTANT
Repeat flushing procedure each time a new Filter Cartridge is installed.
