background image

www.watercare.co.uk

www.watercare.co.uk

Thank you for purchasing your new water softener from WaterCare.

In this booklet you will find everything you need in respect of 

warranties and helpful hints to ensure you get the best from 

your new softener. 

Please note the index below and find relevant pages to 

your purchase.

CONTENTS

Helpful Hints

Page 3

Direct Purchases T&C's

Page 4

Register Your Softener

Page 11

HELPFUL HINTS TO KEEP YOUR 

SOFTENER WORKING PROPERLY

2

3

•  Use only Tablet or Pebble Salt.
       (re-order your salt via www.watercare.co.uk)

•  Check the salt level regularly and ensure 

it does not fall below the water level.

•  Fill the cabinet approximately 2-3 inches 

from the top with salt when topping up.

WHAT’S IN THE BOX?

•  Avoid moving the softener once 

installed as this may cause hoses to 
become kinked and cause flooding.

•  Reset time clock if power is cut off for more than an hour.

What’s in the Box?

Page 3

Installation Guide

Page 5

Softener Set Up

Page 8

Installation Instructions

Page 6

•  Your WaterCare Water Softener
•  Salt Lid
•  2 x Stainless Steel Connection Hoses 

       (10mm bore hoses as standard, 19mm also available)
•  Length of Drain Hose
•  Length of ½” Overflow Hose
•  1 x Outlet Hose Mesh Washer Insert

Summary of Contents for HS-10








Reviews: