USER PROGRAMMING
The control panel is designed to operate under most conditions with mimimal programming. Follow the
procedures below to set up the control for normal operation. See Master Programming section in the Service
Manual If custom programming is desired.
NOTE: Some items may not be shown depending on control configuration. The control will discard
any changes and exit User Programming Mode if a button is not pressed for 60 seconds.
The information below explains the information in the User Programming:
Display Parameter
Description
TD
TIME OF DAY
DISPLAY SHOWS TIME OF DAY
DO
DAY OVERRIDE
THIS CONTROL’S FREQUENCY SETTING
RT
REFRESH
THE TIME OF THE DAY THAT
THE SYSTEM WILL CYCLE
