2
3
- WARNING: Supervision is advised for young children and persons
without sufficient knowledge of the workings of the Water Dispenser
-
Do not tilt the Water Dispenser beyond 45˚ always keep upright
- Ensure the Water Dispenser is on a flat surface and placed at least
15cm from the wall.
- WARNING - Keep the Water Dispenser well ventilated if placed in an
enclosed area
- If the Water Dispenser is not in use for long periods of time, unplug
the unit from the wall socket and drain water from the unit via both
taps and the drain situated at the rear of the unit.
- Clean your Water Dispenser before use, if it has not been used for a
long period, discard the water from the hot & cold water taps, before
drinking.
- In the unlikely event of the Water Dispenser freezing up, switch off the
Water Dispenser and allow to dry at room temperature for at least 7
days
- WARNING - Do not damage the thermostat
CAUTION: Plastic bags can be dangerous. To avoid danger of
suffocation, keep this bag away from babies and
children.
2. Characteristics
1. The Water Well Water Dispensers are energy efficient and emit
very little noise.
2. All the components of the Water Dispenser are made of high grade
materials.
4. The Water Dispenser uses a unique electronic refrigerating system
to cool the water, using only 70W of power when cooling.
5. This Water Dispenser is perfect for home or office, this Water
Dispenser is not suitable for outdoor use.
3. Supplied Accessories
- 1 x Filter Cartridge
- 1 x Driptray
- 1 x Bottle
- 1 x Bottle Lid
- 1 x Single Check Valve
4. Part Diagram
COLD POWER
1
2
3
4
5
6
7
8
9
10
11
12
13
1. Lid
2. Upper Container
3. Filter Cartridge
4. Lower Container
5. Cold Water Indicator Light
6. Power Indicator Light
7. Ambient Water Tap
8. Cold Water Tap
9. Drip Tray
10. Quick Release Drain Cap
(situated under the water
dispenser)
11. Side and Back Vents
12. Power Cable
13. Power Switch
