Wall Mounted
1. Use screws (not included) to fix the Charging Base to the wall at a height at least 16 inches
(40cm) above a level surface.
Fig.2
2. Align Hanging Slot of the cleaner to the upper hook of the Charging Base. Push the cleaner to
Charging Base until two extended hooks are secured under the tabs on the Filter Cone base.
Fig.3
Charging the Battery
WARNING!
DO NOT handle the cleaner, external adaptor and charging base while charging with wet hands
and without shoes.
Connect the external adaptor to power source through a residential current device (RCD).
Charge the cleaner with the original external adaptor provided.
DO NOT use power extension cords.
Charge and Recharge time:
Charge
the cleaner
4
hours prior to the first use.
Re-charge
time is
4
hours.
1. Plug the female jack of the external adaptor into the charging port on the side of Charging
Base.
2. Connect the external adaptor to the power source. Now the indicator light on the external
adaptor shows red color. Normally, it takes about
4
hours to complete charging and indicator
light turns to green color.
