ENGLISH
8
For Chemical and Mechanical Reduction - Systems certified for cyst reduction may be used on disinfected waters
that may contain filterable cyst. - This system is not intended to convert wastewater or raw sewage into drinking
water. - Recommended replacement schedule for this system filter is 1892 liters or 180 days, whichever comes first.
- Conforms to NSF/ANSI for VOC and pentavalent arsenic reduction. See performance data sheet and Arsenic Facts
section for an explanation of reduction performance at WaterTechFilters.com/MC-1.
WARNING: This system is for use on water supplies that have been treated to public water systems Standards.
This system has been tested to demonstrate effective reduction of microcystins, however, in the event of a reported
cyanotoxin event in your water supply, other cyanotoxins may be present in the drinking water which may not be
effectively reduced by this system. In the event of a cyanotoxin notification, follow the recommendations of your
drinking water authority.
Please refer to the owner’s manual for proper maintenance and operation. If this device is not maintained or
operated as specified in the owner’s manual, there is a risk of exposure to contaminants. For more information,
visit the manufacturer’s website at watertechfilters.com or the California State Water Resources Control Board at
waterboards.ca.gov.
The MC-1 is certified by IAPMO Against NSF P231 – Microbiological Water Purifiers, based on the
recommendations set forth in the USEPA Guide Standard and Protocol for Microbiological Water Purifiers (OPP Task
Force Report, 1987). EPA Est. 92705-CA-1
Replacement Filter Model: MC-1FX
This System has been Certified by IAPMO
R&T against NSF/ANSI Standards 42, 53,
401 & P231 as verified and substantiated by
test data listed in the Performance Data
Sheet and at www.iapmo.org.
NSF/ANSI
42, 53, 401, P231
WaterTech
800 Freeport Pkwy, #150 | Coppell, TX 75019, USA
+1 469-521-1180 | [email protected]
For additional product information
and to order replacement filters visit:
www.WaterTechFilters.com
For cold water use only
Min/Max. Temp: 40-100° F / 4°-38°C
Min/Max. Pressure: 20-100 psi
Flow Rate @ 50 PSI: 0.75 gpm
Capacity: 1892 liters (500 gallons)
