WS1TC & WS1.25 TC Manual
Page 11
Power Loss
Only the current time of day will need to be reset if power is lost for greater than 8 hours. If power is lost while the system is
regenerating, the control will complete regeneration at the point of interuption once power is restored.
Error Message
If “E1,” “E2”, “E3” or “E4” appears on the display contact the OEM for help. This indicates that the
valve did not function properly.
STEP 1U
STEP 2U
Set Time of Day
STEP 1U
– Press SET
STEP 2U
– Current time: Adjust hour with
▲
or
▼
. With 60 Hz line frequency detection on
power-up, timekeeping is 12 hour with PM indicator. With 50 Hz line frequency detection on
power-up, timekeeping is 24 hour without the PM indicator. Press SET to go to Step 3U.
STEP 3U
– Adjust minutes with
▲
or
▼
. Press SET to exit Set Time of Day.
STEP 3U
