a) More than 1 parameter:
Optional:
The Sampling Point button can be used to select a measurement source under which the measurement results are to be stored.
7-9) use the three "T" keys (each assigned to one of the three cuvette parts) to select the parameters to be measured
Note:
T key 2 seconds = opens parameter selection menu. 2 x short T key = deletes the selected parameter (--)
Note:
There are parameters that can only be measured in chamber 2 and parameters that can only be measured alone
Note:
If the same parameter is selected in more than one chamber, it will be deleted in the other chamber (--)
10) Add the appropriate reagent to the selected cuvette part.
11) if a tablet has been used, crush it vigorously and stir.
12) close the hinged lid
24) press the T button of this measuring chamber to confirm that the reagent has been added. The countdown of this measuring chamber starts
29) After confirming all selected measuring chambers (see step 24), press the OK/Test button.
30) After all countdowns have elapsed, the result is shown in the display
Note:
The countdown displayed after step 13 can be skipped with the on/off button (not recommended).
Note:
Confirmation with the T key and the OK/TEST key can be cancelled by pressing the back arrow key.
PoolLab 2.0
(several parameters simultaneously)
