The following steps depend on whether the user wants to measure only
one parameter
or
up to three parameters
simultaneously.
a) 1 parameter:
Optional:
The Sampling Point button can be used to select a measurement source under which the measurement result is to be saved.
7-9) select the parameter to be measured via one of the three "T" keys (each assigned to one of the three cuvette parts)
Note:
T key 2 seconds = opens parameter selection menu. 2 x short T key = deletes the selected parameter (--)
10) Add the appropriate reagent to the selected cuvette part.
11) if a tablet has been used, crush it vigorously and stir.
12) close the hinged lid
13) Press the "OK/TEST" key.
14) After the countdown has elapsed, the result is shown in the display.
Note:
The countdown displayed after step 13 can be skipped with the on/off button (not recommended).
Note:
Confirmation with the OK/TEST button can be cancelled by pressing the back arrow button.
PoolLab 2.0
(only one parameter)
