5
USER GUIDE: INTELLIZONE2 MASTERSTAT COMMUNICATING THERMOSTAT
IG1605EW 06/15
*IG1605EW*
Monthly Energy Use screen
Yearly Summary screen
Energy Monitoring (If Installed)
To enter your electric utility rate, select KWH cost. The cost can
be set from $0.01 to $2.00. The default cost is $0.10. The total
energy cost for the system will be displayed on the daily and
monthly summary screens
AWL Status (If Installed)
This screen displays the AWL firmware revision and provides
the current AWL communication status relating to an Aurora
WebLink (AWL) device. This screen is available whether an AWL
is installed on the system or not.
AWL Time Synchronization
- When enabled the AWL will
synchronize the thermostat’s date and time with internet
time servers. This option by default is disabled.
NOTE:
setting the proper time zone in the Symphony Portal
is necessary for correct operation.
Monitor AWL Status -
When enabled, the thermostat will
monitor the AWL’s RS485, INTERNET, and SERVER
status. The thermostat will display “AWL Comm Err”
when the AWL is not communicating properly with the
Aurora Modbus Network, “AWL Internet Err” when the
AWL is unable to communicate to the symphony Servers.
This option by default is disabled.
CAUTION:
To clean the thermostat display, lightly
dampen a clean non-abrasive cloth with water or
any non-abrasive household cleaner. To clean,
gently wipe the surface of the thermostat.
NOTE: Do not spray liquids directly on the
thermostat.
Summary of Contents for IntelliZone2 MasterStat
Page 7: ......
