Water Softener
Page 5 of 18
Specifications
Feed water
! Do not use this system on water that is microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system. !
Minimum inlet pressure: 20 psig
Maximum outlet pressure: 125 psig
Minimum water temperature: 34 degrees F
Maximum water temperature: 110 degrees F
Power
Voltage: 120VAC
Frequency: 60Hz
Power consumption: 7 Watts Maximum
Installation
Location: Indoors (Protect from direct sunlight)
Minimum ambient temperature: 34 degrees F
Maximum ambient temperature: 122 degrees F
Salt Capacity & Efficiency
All Models 400 lbs (181 Kg)
The Efficiency Rating of these systems are only valid at the stated salt dosage and maximum service flow
rate. The Efficiency was determined in accordance with NSF/ANSI 44
This unit conforms to ANSI/NSF-44 for specific performance claims as
verified and substantiated by test data. Refer to
NSF Compliance Data
Insert
for further information. Contact
Water Doctors
for additional
copies.
