Bypass Valve
Your appliance is equipped with a bypass valve. The bypass valve can isolate the appliance should the appliance
malfunction or leak. It can also permit the use of untreated water for watering plants, shrubs, or lawns.
The bypass is located on the main control valve. See Figure 6. To engage the bypass, turn the knob to the Bypass
position. The appliance will be bypassed and all water to the home is raw, untreated water. To prevent untreated water
from entering the home, water should not be used inside the home when the appliance is in Bypass mode. Ensure that
the appliance is returned to Normal Operation when the appliance is repaired or the use of untreated water is complete by
turning the knob to Service.
To blend hardness back into the water using the bypass, turn the knob slightly from the Service position toward the
Bypass position.
Turbine Sensor Wire
Service Position
Motor Wire
Power Cord
Two-Button
Controller
Bypass Position
Brine Line
Figure 6: Valve View of Softener
WaterBoss Softener Two-Button Owner’s Manual
5/12/2011
11
Summary of Contents for PRO180
Page 22: ...Notes ...
Page 23: ...Notes ...
