Watec WAT-910BD, Communications Manual

Page: 7 / 11

WAT-910BD SPI COMMUNICATION MANUAL(Digital Out)
Camera Parameter
*Factory setting value: 0x00
By using DIGIT OUT(0x5E2:Bit0), the digital output will be turned ON/OFF.
Since no other parameters are allocated in this address, digital output turning ON or OFF is possible by sending
data 0x01(ON) or 0x00(OFF).
e.g.1) turn ON the digital output function
Send following data bytes to the indirect registers for SPI control (address: 0x0036 to 0x003B).
e.g.2) turn OFF the digital output function
Send following data bytes to the indirect registers for SPI control (address: 0x0036 to 0x003B).
5. DEGITAL OUTPUT FUNCTION SETTING
5.1 DIGITAL OUTPUT ON/OFF
Address
Bit
7 6 5 4 3 2 1 0
－ － － －
DIGIT OUT
0:OFF
1:ON
address 0x36 0x37 0x38 0x39 0x3A 0x3B
0x5E2 － － －
symbol C1 C2 ADR DAT CS ST
value(hex) 00 81 E2 01 64 AA
address 0x36 0x37 0x38 0x39 0x3A 0x3B
symbol C1 C2 ADR DAT CS ST
value(hex) 00 81 E2 00 63 AA
- 4 -