3.10.2
Manual Switching Mode(MANUAL)
Set the manual switching mode (MANUAL). The manual switching mode can be fixed to Day mode or Night mode regardless of ambient brightness.
When MANUAL is selected, press the ENTER to display the DAY / NIGHT menu. Move the cursor up or down and use LEFT / RIGHT to adjust items.
3.10.2.1
Day / Night setting(DAY/NIGHT)
Select the Day / Night setting from the Day mode or the Night mode.
*Default : DAY
Day mode is to be set. In a bright environment it works as an ordinary color camera.
As the light intensity lower, it will smoothly switch to the monochrome image.
* Even under the environment of low illumination, the night mode interlocking function
of IR LED control can not be used.
3.10.2.2
Burst signal(BURST)
Select ON / OFF of the burst signal in the Night mode.
*Default : ON
Add a burst signal. Please turn it ON if some monitors and image capture boards may not accept
video signals without color burst.
* We recommend that you turn off BURST when using a displayable device even without a color burst.
No burst signal is added.
* When COLOR is selected with the DAY / NIGHT, the burst signal is always added, regardless of BURST
setting.
OFF
B/W
Night mode is to be set. Imaging will always be monochrome even in a bright environment.
COLOR
BURST
OPERATION
ON
ENTER
DAY/NIGHT
OPERATION
32
