WatchNet AVCDP7, Manual

Page: 53 / 81

Page 53 of 81
351 Ferrier Street • Markham, ON • L3R 5Z2
PHONE: 416-410-6865 TOLL FREE: 1-866-331-3341 • FAX: 905-752-0186
www.watchnetinc.com / info@watchnetinc.com
o
How To Notify DTMF – Is only available if type is selected as “Info”
o
DTMF Payload – settings for payload type for DTMF.
Note: The default settings for DTMF is RFC2833 which is the standard

Call – settings for call related configurations.
o
Max Local SIP Port – to configure the maximum local SIP port for designated account.
o
Min Local SIP Port – to configure the minimum local SIP port for designated account.
o
Caller ID Header – settings to which caller ID format fetch to display on video phone UI.
o
Auto Answer – If enabled, video phone will auto-answer any incoming call for the
designated account.
o
Provisional Response ACK – 100% reliable for all provisional messages, this means it will
send ACK every time the video phone phone receives a provisional SIP message from SIP
server.
o
Register with user=phone – if enabled, video phone will send user=phone within SIP
message
o
Invite with user=phone – if enabled, the video phone will invite to send user=phone
within SIP message.
o
PTime – range from 10,20,30,40,50 & 60, can also be disabled
o
Anonymous Call – If enabled, all outgoing call for the designated account will be
anonymous number.
o
Anonymous Call Rejection – if enabled, all incoming anonymous number will be
rejected automatically.
o
Miss Call Log – enabling/disabling miss call log.
o
Prevent SIP Hacking – enable to prevent SIP from hacking

Session Timer – settings for session timer configuration
o
Active – if enabled, the ongoing call will be disconnected automatically once the session
expired, unless it’s been refresh by the UAC or UAS.
o
Session Expire – configure expiry time for the call session.
o
Session Refresher – select which should be responsible on refreshing a call session

UAC – stands for User Agent Client, or the video phone

UAS – stands for User Agent Sever, or the SIP server

BLF List – these settings allows you to configure BLF List URI Addresses.
o
BLF List URI – stands for Busy Lamp Field List
o
BLF List Pickup Code – sets the BLF pick up code
o
BLF List Barge In Code – sets the BLF barge in code

Broadsoft – AOC is a feature used to be an accounting on Broadsoft platform

NAT – settings for NAT related configurations
o
UDP Keep Alive Message – if enabled, video phone will send UDP keep alive message
periodically to router to keep NAT port alive.
o
UDP Alive Msg Interval – Keep alive message interval