Page
46
of
63
351 Ferrier Street • Markham, ON • L3R 5Z2
PHONE: 416-410-6865 TOLL FREE: 1-866-331-3341 • FAX: 905-752-0186
www.watchnetinc.com / [email protected]
Codecs –
Codecs allows you to disable or enable the available audio codecs, codecs means
coder-decoder which is used to transfer analog signal to digital or vice versa.
Video Codec –
The intercom supports two video codecs: H263 and H264, each codec has
different codec resolutions, bitrate and payload.
Subscribe –
This settings is to configure the MWI, BLF and ACD subscription settings.
o
MWI –
Message waiting indicator which is used to indicate whether there is a unread
voice mail.
o
BLF –
BLF stands for Busy Lamp Field which is used to monitor the designated extension
status.
o
ACD –
ACD stands for Automatic Call Distribution which is often used in offices or
customer services such as call center, this setting is to set an expire time of the ACD
subscription.
DTMF –
DTMF means Dual Tone Multi-Frequency.
o
Type –
Supports Inband, Info, RFC2833 or their combination
o
How To Notify DTMF –
Is only available if type is selected as “Info”
o
DTMF Payload –
settings for payload type for DTMF.
Note: The default settings for DTMF is RFC2833 which is the standard
Call –
settings for call related configurations.
o
Max Local SIP Port –
to configure the maximum local SIP port for designated account.
o
Min Local SIP Port –
to configure the minimum local SIP port for designated account.
o
Caller ID Header –
settings to which caller ID format fetch to display on Intercom UI.
o
Auto Answer –
If enabled, intercom will auto-answer any incoming call for the
designated account.
o
Ringtones –
allows you to choose ringtone for each account.
o
Provisioning Response ACK –
100% reliable for all provisional messages, this means it
will send ACK every time the intercom phone receives a provisional SIP message from
SIP server.
o
Register with user=phone –
if enabled, intercom will send user=phone within SIP
message
o
Anonymous Call –
If enabled, all outgoing call for the designated account will be
anonymous number.
o
Anonymous Call Rejection –
if enabled, all incoming anonymous number will be
rejected automatically.
o
Miss Call Log –
enabling/disabling miss call log.
o
Prevent SIP Hacking –
enable to prevent SIP from hacking
Session Timer –
settings for session timer configuration
o
Active –
if enabled, the ongoing call will be disconnected automatically once the session
expired, unless it’s been refresh by the UAC or UAS.
o
Session Expire –
configure expiry time for the call session.
