Administration Guide
139
Enabling and Viewing SNMP Logs
To view or download the log, go to the
Logging > Configuration
tab and click
Download W3C Log
.
Enabling and Viewing SNMP Logs
When Simple Network Management Protocol (SNMP) is enabled, the Firebox SSL VPN Gateway reports
the MIB-II system group (1.3.6.1.2.1). The Firebox SSL VPN Gateway does not support Firebox SSL VPN
Gateway-specific SNMP data.
You can view SNMP messages in the Administration Tool and you can configure an SNMP monitoring
tool such as the Multi Router Traffic Grapher to provide a visual representation of the SNMP data
reported by the Firebox SSL VPN Gateway in response to queries. For a sample of Traffic Grapher output,
see “Multi Router Traffic Grapher Example” on page 139.
To enable logging of SNMP messages
1
Click the
VPN Gateway Cluster
tab and then click the
Logging/Settings
tab.
2
Under
SNMP Settings
, select
Enable SNMP
.
3
In
SNMP Location,
type the SNMP location. This field is informational only.
4
In
SNMP Contact,
type the contact. This field is informational only.
5
In
Community
, type the community. This field is informational only.
6
In
Port
, type the port.
7
Click
Submit
.
Multi Router Traffic Grapher Example
The Multi Router Traffic Grapher is a tool used to monitor SNMP data, such as traffic load. Multi Router
Traffic Grapher generates HTML pages containing PNG images that provide a visual representation of
the traffic. Multi Router Traffic Grapher works under UNIX, Windows 2000 Server, and Windows Server
2003.
Note
The information in this section provides a general overview of working with Multi Router Traffic
Grapher. For information about obtaining and using this tool, visit the Multi Router Traffic Grapher Web
site at
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/
.
sc-status
The Firebox SSL VPN Gateway-to-client request status code. For a description of status
codes, refer to http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html.
cs-uri
The client-to-Firebox SSL VPN Gateway request URI.
sc-uri
The Firebox SSL VPN Gateway-to-client request URI.
Field
Description
Summary of Contents for SSL 1000
