4
Connection Guide
1.
Mount the 4 Cameras as required and connect the supplied combination DC Power and Video
leads.
2.
Connect the 4 x corresponding camera Video leads (Yellow) into the camera inputs at the rear of
the DVR. Be sure to take note of the Camera input 1
– 4, as this will determine the camera
channels.
3.
Connect the 4 x camera Power leads (RED) into the Power Splitter Cable. Ensure your camera
power supply is connected to each of the cameras power cables.
4.
Connect the 12V Power Supply
to the DVR4E.
5.
Plug power adaptor into a Power-point.
6.
Switch DVR4E on from back of device. Then hold front Power button for 3 seconds.
7.
The power LED at the front of the DVR4E should now be illuminated and the unit will make a
loud beep sound to indicate it is powered.
8.
Connect the included mouse to the USB port on the front or back..
9.
Connecting your local network or modem to the DVR4E (we recommend doing this last step
after all the cameras have been configured).
Summary of Contents for DVR4E(PACK)
Page 2: ...1 ...
