WatchGuard AP332CR Hardware Guide
LED Color
Status
Troubleshooting
Flashing Red
or Orange
Device cannot
connect to
WatchGuard
Cloud
This can occur for several reasons, for example:
n
Device did not receive an IP address from DHCP
n
Device cannot connect to
*.watchguard.com
or
*.watchguard.io
because of a network issue or blocked
port
Use the access point command line interface (CLI) to run
network connectivity diagnostic tests. For more information,
see
Access Point Command Line Interface
.
Solid Blue
Successfully
connected to
WatchGuard
Cloud
Device is online and connected to WatchGuard Cloud.
Flashing Blue
Flash LED
action from
WatchGuard
Cloud
LED flashes blue for 60 seconds for identification.
Current factory default access points ship with firmware version 1.1.4-0 or lower.
WatchGuard Technologies, Inc.
14
