LAN1
Standard RJ45 connector that supports link speeds of 10/100/1000 Mbps. You can use this interface
as a wired extension of an SSID or a VLAN extension. Link aggregation is not supported on this
interface.
Reset Button
Resets the AP to factory-default settings.
n
Use a paper clip or other small object to press the reset button through the hole.
n
Press and hold the reset button for up to 10 seconds until all LEDs go off to indicate that the AP
has rebooted.
Device Indicators
The AP225W has these LED indicators:
WatchGuard AP225W Hardware Guide
6
WatchGuard Technologies, Inc.
