9
10
Zone Mode
Activated Zone
Sensors set to Activated Zone are armed when the system is in Arm (Full Arm) or
Home Arm (Part Arm) Mode. We recommend setting Window/Door Sensors to
this zone because they would always be installed to the perimeter of a house in
practice, like doors or windows.
Deactivated Zone
Sensors set to Inactivated Zone are only armed when the system is in Arm (Full
Arm) Mode. If Home Mode (Partial Arm) is used, these Sensors are not armed and
will not activate the alarm on trigger. We recommend setting PIR Motion Sensors
(if purchase separately) to Home Zone because they should be installed inside the
house.
Instant Alarm Zone
Sensors set to Instant Zone will activate the alarm when triggered, regardless of the
alarm status at the time (armed or disarmed).
Alarm Delay Zone
The working mode of sensor in this zone will be same as Normal Zone sensor’s, but
the Hub will alarm after an Entry Delay Time* if this sensor is triggered when system
was armed or in home mode.
* Entry Delay Time: you can set this delay time on App [Settings]-[Delay Settings]-
[Entry Delay].
Note:
Optional Smoke, Gas Leakage or Water Flood Sensors are automatically registered as
Instant Alarm Zone Sensors and cannot be changed to other Zone. Any Motion or Door/
Window Sensor paired to the Hub by pressing the Tamper Switch will also register as a Instant
Alarm Zone Sensor. A Instant Alarm Zone Sensor will activate the alarm when triggered,
regardless of the alarm status at the time (armed or disarmed).”
Internal Siren
The volume level, alarm duration, and arm/disarm beep can be adjusted in the App.
Wireless Siren
When connecting an Outdoor Siren (optional accessory) to the Hub, it can be
enabled/ disabled by switching the Alarm option to on/off. The on/off arm/disarm
beep and alarm duration can also be adjusted.
