1
Package Contents
(
Before commencing installation, please ensure you have all the parts listed below.)
Installation
1. Connect the DC 8V power supplies to each camera & take note of their channel numbers
2. Connect DC 13.5V power supply to the back of the monitor. Make sure the camera type selection switch on
the rear of the monitor is set to “wireless”.
3. Raise the antenna on the monitor to the vertical position.
4. Switch the monitor on via the power switch on the front.
5. Depress the channel selection switches for both of your supplied camera channels. Every 3 seconds you
1
2
6
3
1 A
