Config Mode Menu
•
CALIBRATION:
Calibration, Bump, Set span value
•
MEASURE:
Enable/Disable sensors, Gas units
•
ALARM:
Set alarm limits, Man-Down info, etc.
•
DATALOG:
Clear data, Set interval, Select sensors
•
MONITOR SET-UP:
LCD, Pump speed, Language
•
WIRELESS:
Wireless on/off or Register
•
EXIT:
Exit from Config Mode
Exit Config Mode
Press the Right Key repeatedly until the “Exit” icon is
highlighted, then press Left to exit.
Scrolling Numerical Entries
While modifying numerical values such span values
or alarm limits, the function of the Left [+/OK] key
can be switched between number increase
and
decrease
by pressing both keys simultaneously.
Change Alarm Limits
All alarm limits can be customized, including High,
Low, STEL and TWA alarms.
• To enter the alarm limit setting:
Config mode Alarm Menu Alarm Type.
• To change a value:
Press Right to highlight the desired digit and press
Left to change the value. Holding down the Left Key
for continuous number scrolling.
