www.watchgas.eu
D e t e c t i o n
User Manual
Photo-ionization detector NEO
D e t e c t i o n
11
6.2 ENTERING EN EXITING CONFIGURATION MODE
From the main reading display, press and hold the Up key
Esc
Ent
OK
and Mode
key
Esc
Ent
OK
simultaneously until the Password screen is shown. Input the
4-digit password, move the cursor to ‘√’, then press the Up key
Esc
Ent
OK
to enter
Configuration Mode.
Note: The default password is 0000. The password can only be changed by
connecting the instrument to a PC running mPower Suite software.
Upon successfully entering Config Mode, the screen on the right will be
displayed. The Calibration label is shown and its icon is highlighted. Use
the Up key
Esc
Ent
OK
or Mode key
Esc
Ent
OK
to scroll through the menu until the
desired item is reached, and use the Right key to select it.
To Exit Config Mode and return to normal operation, press the Left key
repeatedly from any of the Config Menu displays.
6.3 CONFIGURATION MODE MENUS
This table summarizes the Config Mode menus and sub-menus. Not all of these menus will be displayed
if the option is not set up using mPower Suite software
Calibration
Measurement
Alarm Setting
Datalog
Monitor Setup
Wireless
Zero Calibration
Measurement Unit
Alarm Limits
Clear Datalog
Date & Time
Radio On/Off
Span Calibration Measurement Gas
Alarm Mode
Interval
Display
Set Cal. Gas
Alarm Settings
Pump Speed
Set Span Value
Comfort Beep
Set Pump Stall
Set Span 2 Value
Man-Down Alarm
3-point Calibration
Rolling Graph
Real time data
Language
Self-Zeroing
