4. Follow the IP camera setup instructions beginning on page 4.
5. Once setup is completed, disconnect the camera.
6. Repeat steps 1-5 for each camera that you have.
**Note** For public view monitor (PVM) setup, please call our technical support team.
DVR Setup (must be completed before setting up cameras)
Close the DVR software and, in the bottom right-hand corner, find the Networking icon(
) and
right-click on it and go to Open Network and Sharing Center. In upper left-hand corner, click Change
adapter settings.
Then double-click the corresponding connection that corresponds to the camera network. It will be the
one that does not have an internet connection (it also may say unidentified network).
Watcherproducts.com ♦ Watcher Products ♦ 877-289-2824 5
