1. Connect the green and yellow wire from the floodlight to the existing
ground wire inside the junction box. Use the included wire nut to connect
the wires properly.
2. Using a wire nut, connect the white neutral wire from the floodlight to the
neutral wire of the junction box.
3. Using a wire nut, connect the black hot wire from the floodlight to the hot
wire of the junction box.
The white wire on your floodlight is a neutral wire.
The black wire on your floodlight is a hot wire.
Wiring the Floodlight and Junction Box Through the EVA Gasket
Page 5
Neutral Wire (White)
Hot Wire
(Black)
Ground Wire
(Copper)
Junction Box
Wire Nuts
Important:
Before mounting the floodlight, completely apply the EVA gasket around the
perimeter of the cover plate where the back of the cover plate meets the mounting surface.
This prevents water from seeping into the junction box.
a. Make sure the wire connections are secured. Carefully place the wires
into the junction box.
4
4b. Mount the floodlight onto the crossbar and secure it with the screw cap
provided.
5. Check the wirings are installed correctly by switching on the floodlight.
