Page 5 - 6
Need help? Send us an em ail at: [email protected]
1. You can connect the Solar Spotlight Charger to your security camera to begin
charging the camera.
2. Open the charging port of the Solar Spotlight Charger and insert the USB-A end of
the charging cable. Connect the magnetic cable end to the camera at the magnetic
charging port. Make sure it is connected firmly. It will start charging your camera
automatically.
Note: Press firmly after you have plugged in the cable to make sure it is sealed well.
1. Assess where intruders are most likely to enter and the path they would take. Most
intruders enter the home through a back door, patio door, or garage door. Hence it is
advisable to place the Solar Spotlight Charger near entrances to your home.
2. Mount the Solar Spotlight Charger on walls that an intruder would walk alongside,
such as a narrow pathway. The motion sensor works best when movements are
detected parallel to the Solar Spotlight Charger, not towards it.
3. You can also mount the Solar Spotlight Charger charger next to your security cameras
to illuminate the camera’s vision at night.
4. Make sure that the Solar Spotlight Charger is consistently in direct sunlight and it is
not obstructed by trees, buildings, or other obstacles.
5. The surface of the Solar Spotlight Charger must be kept clean. If the light’s solar panel
is dusty or dirty, it will influence the efficiency of the light’s ability to charge.
You need to ensure that the solar panel faces the sun for 10 hours straight to fully charge
its internal battery.
Note: The Solar Spotlight Charger is designed to keep your outdoor camera’s battery fully
charged but heavy usage of your camera can drain the camera battery faster than the
Solar Spotlight Charger can recharge it.
Connecting to a Security Camera
Charging Time
Important Notes
