Wassermann WW-33, User Manual

Page: 7 / 16

6.2 Installation
Open the box, remove the packing materials, and carefully lift out the device and
accessories. Check the included accessories.
The device has to stand horizontally on a steady and even surface.
Install the device in a place where it will not block the working area and the
functionality (take the dimensions into account).
Do not install the unit outdoors or in places without proper ventilation.
Before start-up, be sure the device reaches room temperature.
6.3 Storage
If the unit is to be stored for an extended period, protect it from moisture and dust.
7 Installation/ Start-up
Please remove the safety packing as follows:
•
Take the pump lever out of the union piece.
•
Undo the bolt and remove the red safety packing. Insert the lever and secure it
with the bolt.
•
Screw the ball on the end of the lever.
•
Centre the cap on the piston to guarantee even pressure distribution.
•
Bring down the piston on the cap.
The usual pressure is between 2.5 and 5 tonnes. This is shown in the green
area on the pressure gauge. To avoid damage to the cap and the press, do not
pump beyond the zone on the pressure gauge.
7