8.2
VACUUM MIXING with the Wamix
By default, the timer is set to 60 seconds.
6.2.1 Wamix-Classic IV
1. Set the mixing time on the
timer (1)
(up to 999 sec.) using the buttons (4 and 5).
A: Automatic mixing
= turning knob (7) you can make a free choice of 200 rpm until 600
rpm. – mixing time is stored until a new time is set.
B: For manual mixing
= set the turning knob (7) to “0”, and switch the mixer on once
vacuum is created, turning knob (7) to the position which you need.
Please note: The timer (total time) starts counting down as soon as sufficient
vacuum is achieved (beaker securely attached to the device). As this therefore
corresponds to the mixing time, the mixer can be switched on and off any number of
times (e.g. for pre- and post-vacuum). The beginning and end of the mixing time can
be read on the timer display (6).
2. Place the mixing materials in the beaker and mix by hand until the powder is
well mixed
with the liquid.
3. Seal the beaker with a lid.
14
1
2
4
5
6
fig. 5
7
Summary of Contents for Wamix-Classic IV
Page 24: ......
