Screw the securing bracket to the Wamix as shown in Figure 3.
Do not yet fully tighten the Phillips head screw, however – you still need to be able to
move the securing bracket.
fig.3
Carefully hook in the device. Check, whether the device hangs loosely (i.e. moving back
and forth on the screws). If this is the case tighten the 6x50 screws until the device hangs
securely. Finally tighten the securing bracket. First at the wall, then tighten the screw on
the device itself (Figure 3).
10
Screw 4x16
Washer
Serrated washer
Phillips head srew
Securing angle
„control window“
Summary of Contents for Wamix-Classic IV
Page 24: ......
