7
Washer Specification
Max. Pressure
(PSI/Mpa)
2200/155
Flow (L/min)
7.5L/min
R.P.M.
3200
Power(HP)
3.5
Displacement (CC)
141
Fuel Capacity (L)
0.8L
Dimension (cm)
65*52*53
Assembly Instruction
Step 1. Installing handle assembly
Attach handle assembly to the frame by using two bolts M6x40 and two nuts M6
The engine on this machine is delivered without oil. Add 0.55ltr of Oil before
starting the engine.
Operating Instruction
Surface preparation
Before starting any cleaning task, it is important to inspect the area for objects which could create a hazard. Remove
any objects from the area which could be tripped over, such as toys or outdoor furniture. Ensure that all doors and
windows are closed.
Caution:
★
Dirt in the feed water will damage the unit. To avoid this risk, we recommend checking the water filter (located
inside the water inlet)
★
To prolong the life of the unit, it is recommended to rest the unit 5 minutes after every 30 minutes of use.
Water Supply (Cold Water Only)
★
Flow rate of water supply must not fall below 19 LPM (liters per minute) at 20PSI.
★
Flow rate can be determined by running the water for one minute into an empty container.
The water supply temperature must not exceed 40
℃
(104
°
F)
Starting Procedure
Step 1. Insert the lance into spray gun, and twist it. Tighten Securely
Step2. Connect hose to spray gun. Tighten securely
