9
2. Do not remove screws and ring around the lens. Doing so will compromise the
waterproof seal of the camera.
3. When changing the battery or MicroSD card, ensure no debris (dust, sand small
rocks, ect.) is on the rubber seal on the camera backing. When finished changing the
battery or MicroSD card, ensure the lock is buckled securely and locked properly.
4. Avoid damaging the screen on the back of the camera. Punctures, scratches or
cracks may compromise the waterproof seal.
5. If you notice the camera
’
s battery has swelled, replace the battery to avoid
compromising the waterproof seal.
6. After using the USB or HDMI ports, replace the side cap and tighten until a tight
seal forms. (Tighten until the cap cannot be moved in either direction easily.) Round
coins or objects with thin, flat edges are good tools to help tighten the side cap
completely.
7. After using the camera in salt water, wash the camera under regular tap water and
dry completely. Once dry, open the battery compartment and remove the battery.
Place battery in dry ventilated area to ensure battery remains dry. This avoids any
degradation from salt water over a long period of time.
8. Do not remove any screws from the camera. Doing so will compromise the
waterproof seal.
Recording Functions
Normal Recording
Turn on the camera and press the record button once to take video, and the green
LED light between the arrows will flash and the recorded time and recording icon are
displayed on the top of LCD screen
Press the record button again to stop recording and save the file
–
then remaining
recording time is displayed at the top of LCD screen
Loop recording
1) Turn on the camera, press the menu button and use the right arrow to choose
“
Loop recording
”
to 2 mins (for more options refer to Video Settings), exit the menu
and press the record button once to take a video. The LED light between the 2 arrows
will flash green and at the top of the LCD screen it displays the red flashing recording
icon and the recording time
