Wasp WPL4M Series, User Manual

Page: 60 / 73

Min. Paper
Max. Gap/Mark
Paper
Paper
Menu
6.3.2 Sensor
Auto
C ion
Gap
Black Mark
alibrat
Manual Setup
Continuous
Gap
Scan Backing
Scan
Black Mark Scan Mark
Scan
Continuous
Remove
Scan
Main
Setup Sensor
Threshold
Maximum
Length
Advanced
Auto
Fixed
ON
OFF
Label Paper
Item Description Default
Auto Calibration
This item is used to set the media sensor type and
calibrate the selected sensor. Printer will feed 2 to 3 gap
labels to calibrate the sensor sensitivity automatically.
N/A
Manual Setup
In case “Auto Calibration” cannot apply to the media,
please use “Manual Setup” function to calibrate the
sensor manually. Please follow the shown step from LCD
to do.
Note:
You can open the media cover to move the paper but
have to close the media cover for each scan.
N/A
Threshold
This item is used to fix the calibrated sensor sensitivity.
Auto
Maximum
Length
This item is used to set the max. calibrate length. 152
Advanced
This item is used for pre-printed paper. If this advanced
function is turned “ON” then you can setup the min.
paper and max. gap/black mark size.
OFF
- 49 -