3.2
Charge the Battery
It takes 5~6 hours to fully charge the battery before the first time usage. The
lifetime of the battery is 300 times for charge/discharge cycles
.
3.2.1
Charge the Battery
1.
The battery is installed into the
printer.
2.
Open the interface cover and plug
the power cord to the power jack.
3.
Plug the power cord into a properly
power outlet.
Standard panel:
LCD panel: (option)
Note:
Please switch OFF printer power prior to
plug in the power cord to printer power
jack.
When the battery is charging, please do
not remove the battery from the printer,
otherwise, please re-plug the power cord
into a power outlet.
4.
When the battery is changing, the
color of battery status LED indicator
is solid amber.
Note:
The battery is completely charged and
the amber of LED indicator will turn to
green.
- 14 -
Summary of Contents for WPL4M Series
