58
WPL 406 User Manual
Self Test …
Printing …
1/1
Printing …
1/1
Dump Mode
UP:
Fwd.
DOWN:
Rev.
MENU:
Exit
3.3.1 Print Config.
This feature is used to print current printer configuration to the label. On the
configuration printout, there is a print head test pattern, which is useful for
checking if there is any dot damage on the print head heater element.
(Please refer to section 4.2.)
Diagnostics
1/4
>
Print Config.
Dump Mode
Rotate Cutter
3.3.2 Dump Mode
Captures the data from the communications port and prints out the data received
by printer. In the dump mode, all characters will be printed in 2 columns as
following. The left side characters are received from your system and right side
data are the corresponding hexadecimal value of the characters. It allows users or
engineers to verify and debug the
program. (Please refer to section 4.2)
Diagnostics
2/4
Pritn Config.
>
Dump Mode
Rotate cutter
Note:
1. Dump mode requires 4” wide paper width.
2. Turn off / on the power to resume printer for normal printing.
3. Press FEED button to back to the previous menu.
3.3.3 Rotate Cutter
In case paper is jammed in the cutter, this feature can rotate the cutter blade forward or
reverse direction, which is helpful to remove the jammed paper easily from the cutter.
Diagnostics
3/4
Print Config.
Dump Mode
>
Rotate Cutter
