WPA 1200 II Quick Start Guide
3
Installing the Battery
1. Open the battery compartment by pushing the latch in the direction of the
arrow and lifting up.
The battery compartment is displayed:
2. Position the battery pack, making sure the
battery contacts are aligned with the contacts in
the compartment and the battery is placed on
top of the plastic tab, as shown in the following
illustration.
3. Slide the battery pack into the battery bay while
simultaneously pulling the plastic tab and
securing clip until the battery clicks into place.
4. Replace the battery compartment cover.
Compartment contacts
Plastic battery tab
Battery securing clip
Plastic tab
Securing clip
