background image

Programming Barcodes

Quick Reference Guide 

15

Programming Barcodes

For your convenience, this guide includes the programming bar-
codes required to configure the reader for use with different inter-
face (terminal/host) types.

See the Product Reference Guide (PRG) for more complete infor-
mation about programming and configurable features. You can 
download the latest version of the PRG and any other available 
publications for the reader from the website listed on the back cov-
er of this manual.

Resetting the Standard Product 
Defaults

If you aren’t sure what programming options are in your reader, or 
you’ve changed some options and want the factory settings re-
stored, scan the Factory Default Settings barcode below. This will 
copy the factory configuration for the currently active interface to 
the current configuration.

Factory Default Settings

Some interfaces require the scanner to start in
the disabled state when powered up. If addi-
tional scanner configuration is desired while in
this state, pull the trigger and hold it for five
seconds. The scanner will change to a state that
allows programming with barcodes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for WLS9600

































Reviews: