4
Use the
Factory Default
barcode to reset the scanner to the default
settings.
Factory Default
In order to configure Wasp WLR8950 Scanners, you must familiarize
yourself with the setup procedures on the following pages. The default
settings of the Wasp WLR8950 Scanners are identified on each page and
clearly marked using an asterisk (*).
The default settings have been
preprogrammed for the most common barcode configurations. Use the
Setup & Configuration only to customize the Wasp WLR8950 Scanner
settings.
If you need to configure the scanner, the default settings will
be overwritten. All the programmed settings are stored permanently in
non-volatile memory; therefore, your configuration will be maintained even
if the keyboard power to Wasp WLR8950 Scanners is removed by turning
off your PC.
In order to configure Wasp WLR8950 Series Scanners,
two basic steps need to be followed:
(1) Locate the group that contains the options to be changed.
(2) Scan the barcode representing the option to be changed.
The scanner will sound two beeps.
Setup & Configuration
Factory Default
QSG
