Chapter 5
11
Beep Volume Settings
00
None
01
Lowest
02
Low
03
Medium (Default)
04
Medium-High
05
High
06
High-Medium
07
Highest
The 'Beep Volume' configuration changes the volume of the audible indicator of
the WLP 4170 CCD Scanner.
NOTE:
For help in configuring these settings, consult the programming steps on
page 5.
1. Scan “Begin ”
2. Scan “Set Beep Volume”
4. Scan the “Finish” barcode on
the back cover flap
5. Scan the “Exit” barcode
3. Pick a setting from the table at
right, then turn to the back cover
flap and scan the corresponding
two digits. For example: if you
desire no beep, scan 0 and 0 on
the back cover flap
Begin
Set Beep Volume
Exit
Beep and Delay
